revision: 0
FlexxPump 125 (24V)
User Manual
06
EN-
SCHMIERSYSTEME
DIRECT LUBRICATION SYSTEMS
D L S
1. General information about this manual
This user manual contains all necessary information to use the FlexxPump 125 in the
power supply version safely and as intended. In the event that supplementary sheets
are attached to these instructions, the information and data contained in the supple-
mentary sheets are valid and replace the corresponding information in this user ma-
nual. Any contradictory information contained in this user manual thus becomes invalid.
If you have any questions regarding special applications, please contact DLS Schmier-
systeme GmbH (chapter I.II).
The actual and factual operator must ensure and guarantee that these instructions,
including any supplementary sheets, have been read and understood by all persons
responsible for the installation, operation or maintenance of the FlexxPump 125. There-
fore, keep these instructions in a suitable place, ideally in an easily accessible place, in
the surrounding area of the FlexxPump 125.
Inform your colleagues who work in the local area of the machine about safety instruc-
tions so that nobody gets hurt.
This manual was written in German, all other language versions are translations of this
manual.
1.1 Signal words
The following signal words are used in this manual to draw your attention to possible
dangers, prohibitions and other important information:
DANGER This signal word points you to an immediate and threatening risk of
serious injury or death.
WARNING This signal word indicates a potentially imminent danger which can
result in serious injury or even death.
CAUTION This signal word indicates a potentially imminent danger that can
result in minor to severe injuries.
NOTICE This signal word indicates a potentially imminent danger which can
result in damage to property.
INFORMATION
This signal word refers to practical application tips or particularly
important information when using the FlexxPump 125.
To Next Page
Loading...
