revision: 0
FlexxPump 125 (24V)
User Manual
08
EN-
SCHMIERSYSTEME
DIRECT LUBRICATION SYSTEMS
D L S
2. Safety
All persons working with the FlexxPump 125 must follow these operating instructions, in
particular the safety instructions and the rules and regulations applicable at the place of
use. Generally applicable legal regulations and other rules as well as the relevant rules
and regulations for accident prevention (e.g. Personal Protective Equipment (PPE)) and
environmental protection must be observed.
2.1 EC/EU Directive
Within the scope of the EC/EU Directive, (re)commissioning of a machine on which the
FlexxPump 125 has been installed and/or tted is prohibited until it has been clearly
established that the machine complies with the provisions of the applicable Directive.
An EC/EU declaration of conformity for the FlexxPump 125 can be found in the appen-
dix (chapter I.II).
2.2 Hazards
In order to avoid danger to the user or damage to the machine on which the FlexxPump
125 is used, the FlexxPump 125 may only be used for its intended purpose (chapter
2.5) and in a technically safe condition.
Always inform yourself about the general safety instructions (chapter 2.7) before star-
ting to work.
2.3 Sta
Only qualied sta who has read and understood this manual may work with the Flexx-
Pump 125. Local and/or company regulations apply accordingly.
2.4 Reasonably predictable misuse
Any use of the FlexxPump 125 which exceeds the maximum permissible technical data
is generally considered to be improper and therefore prohibited.