DLS FlexxPump 125 - Maintenance and Disposal; 9.1 Maintenance Schedule

revision: 0
FlexxPump 125 (24V)
User Manual
65
EN-
SCHMIERSYSTEME
DIRECT LUBRICATION SYSTEMS
D L S
9. Maintenance and disposal
 Before starting any maintenance work, inform yourself about the general safety
instructions (see Chapter 2) and observe the relevant local and operational safety
regulations.
 Do not deactivate any protective device without authorization!
9.1 Maintenance schedule
The following maintenance schedule must be observed for the FlexxPump 125:
Maintenance Commis-
sioning
After 500
hours or after
3 months
Every
year
If required
Cleaning x x x x*
Visual check x x x x*
Cartridge change x** x*** x*
* Depending on operating conditions and lubricant consumption
** Depending on delivery status (ordered version)
*** Recommendation after 2 years at the latest