revision: 0
FlexxPump 125 (24V)
User Manual
37
EN-
SCHMIERSYSTEME
DIRECT LUBRICATION SYSTEMS
D L S
If you are in the operating mode Hour-Mode -h-, the FlexxPump 125 executes exactly
as many strokes in succession after triggering the RUN function as were set in the PRO
menu in the variable c.
If you are in the operating mode Empty-Time Et, the FlexxPump 125 performs only
one (1) stroke after triggering the RUN function.
The RUN-Menu can only be reached from the ON mode (FlexxPump 125 switched
on). When you have entered the RUN-Menu, you will return to the ON mode.
To Next Page
Loading...
