revision: 1
FlexxPump 250/400 DLS
User Manual
13
EN-
4. Transport and storage
4.1 Packaging
The FlexxPump 250/400 DLS is delivered in an outer packaging (cardboard box) and
- depending on the scope of delivery with a lubricant cartridge and other accessories -
in the same package. To protect them from moisture and dirt, they are also packed in
PE lms.
Dispose the packaging materials at the designated disposal points in compliance with
the relevant national and company regulations.
After receiving the FlexxPump 250/400 DLS, check the delivery note for completeness
and correctness.
Any missing parts or damage must be reported immediately to the forwarding agent,
the insurance company or DLS Schmiersysteme GmbH in writing.
4.2 Transport
NOTICE
Hard shocks, e.g. due to falling or setting down too hard, can
damage the FlexxPump 250/400 DLS.
§ Do not throw the FlexxPump 250/400 DLS.
Store the FlexxPump 250/400 DLS in its original packaging in a vertical position in a
dry, frost-free environment at an ambient temperature of +5°C to +30°C. The maximum
storage time in unopened condition is 2 years.
The so-called "First-In-First-Out-Principle" (FiFo) is recommended for storage logistics.
4.3 Storage
To Next Page
Loading...