revision: 1
FlexxPump 250/400 DLS
User Manual
48
EN-
Carry out the work as described above.
If the empty state of the cartridge (Error E1) was reached during a dispensing cycle,
it is automatically interrupted and continued automatically after completion of the work
explained above.
9.3 Disposal
When disposing the FlexxPump 250/400 DLS, empty or opened cartridges, observe
the relevant national regulations in force.
When disposing the FlexxPump 250/400 DLS, observe the relevant safety data
sheets and disposal instructions for the individual components.
It is not possible to refill empty lubricant cartridges.
To Next Page
Loading...