DLS FlexxPump 250 DLS - General Safety Instructions

revision: 1
FlexxPump 250/400 DLS
User Manual
09
EN-
2.7 General safety instructions
The following safety instructions are given for the FlexxPump 250/400 DLS:
DANGER
Damaged or incorrect electrical connections or unauthorized
live components lead to serious injuries or even death.
§ Have all electrical connection work carried out by qualied
personnel only.
§ Replace damaged cables or plugs immediately.
NOTICE
Loose or overloaded screw connections can cause damage to
the FlexxPump 250/400 DLS.
§ Mount and check all screw connections with the permissible
torques specied for this purpose. Use a calibrated torque
wrench.
WARNING
Lubricants are ammable.
§ In case of re, do not use a water jet to extinguish the re.
§ In case of re, use only suitable extinguishing agents such as
powder, foam and carbon dioxide.
§ Observe the relevant safety instructions of the lubricant manu-
facturer on the safety data sheet of the lubricant used.
CAUTION
Lubricants can cause skin irritations.
§ Avoid direct skin contact.
NOTICE
Lubricants can contaminate soil and water.
§ Use and dispose lubricants properly.