DLS FlexxPump 250 DLS - Safety; EC;EU Directive; Hazards; Staff

revision: 1
FlexxPump 250/400 DLS
User Manual
07
EN-
2. Safety
All persons working with the FlexxPump 250/400 DLS must follow these operating
instructions, in particular the safety instructions and the rules and regulations applicable
at the place of use. Generally applicable legal regulations and other rules as well as
the relevant rules and regulations for accident prevention (e.g. Personal Protective
Equipment (PPE)) and environmental protection must be observed.
2.1 EC/EU Directive
Within the scope of the EC/EU Directive, (re)commissioning of a machine on which
the FlexxPump 250/400 DLS has been installed and/or tted is prohibited until it has
been clearly established that the machine complies with the provisions of the applicable
Directive.
An EC/EU declaration of conformity for the FlexxPump 250/400 DLS can be found in
the appendix (chapter 11.2).
2.2 Hazards
In order to avoid danger to the user or damage to the machine on which the
FlexxPump 250/400 DLS is used, the FlexxPump 250/400 DLS may only be used for its
intended purpose (chapter 2.5) and in a technically safe condition.
Always inform yourself about the general safety instructions (chapter 2.7) before
starting to work.
2.3 Staff
Only qualied staff who has read and understood this manual may work with the
FlexxPump 250/400 DLS. Local and/or company regulations apply accordingly.
2.4 Reasonably predictabel misuse
Any use of the FlexxPump 250/400 DLS which exceeds the maximum permissible
technical data is generally considered to be improper and therefore prohibited.