revision: 1
FlexxPump 250/400 DLS
User Manual
44
EN-
Clean the FlexxPump 250/400 DLS from dirt using suitable cleaning agents (e.g.
absorbent towels, cloths).
NOTICE
Compressed air can damage the seals of the Flexx-
Pump 250/400 DLS as well as transport dirt and foreign bodies
into the FlexxPump 250/400 DLS or the lubricant.
§ Do not use compressed air to clean the Flexx-
Pump 250/400 DLS.
Reinstall all safety devices and make sure that no tools remain in the danger area.
Check that the FlexxPump 250/400 DLS is turned on.
Carry out a "Quick Check" (test run) using the control signal 2 seconds (chapter
8.2.1).
9.1.2 Cleaning
9.1.3 Recommissioning after maintenance
To Next Page
Loading...