DLS FlexxPump 250 DLS - Safety; EC;EU Directive; Hazards; Staff

revision: 1
FlexxPump 250/400 DLS
User Manual
04
EN-
6.3 Commissioning 23
7. Operation and settings 24
7.1 General information 24
8. Input and output signals - External control (PLC) 25
8.1 Pin assignment - External control (PLC) 25
8.2 Input signals - External control (PLC) 26
8.2.1 Control signal 2 seconds 27
8.2.2 Control signal 5 seconds 29
8.2.3 Control signal 8 seconds 31
8.2.4 Control signal 12 seconds 33
8.2.5 Control signal 14 seconds 35
8.3 Output signals - External control (PLC) 37
8.3.1 Empty level 38
8.3.2 Error Overload 40
8.3.3 Error Under- or Overvoltage 41
8.3.4 Critical error 42
9. Maintenance and disposal 43
9.1 Maintenance schedule 43
9.1.1 Visual check 43
9.1.2 Cleaning 44
9.1.3 Recommissioning after maintenance 44
9.2 Cartridge change 45
9.3 Disposal 48
10. Released accessories 49
10.1 Lubricants 50
10.2 Tube lengths 50
11. Appendix 51
11.1 Dimension sheet and installation dimensions 51
11.2 EC/EU Declaration of conformity 52
11.3 Spare parts 53
11.4 Flowchart Control signal 2 seconds (for PLC) 54
Chapter Content Page