34 XT30 and XT50 User Guide | Digital Monitoring Products, Inc.
Favorite Schedules
Add a Favorite Schedule
1. At SCHEDULES?, press any Select Key or Area.
2. At PRM EXT OUT FAV, select FAV.
3. At the FAVORITE display, enter the Favorite number (1-20) you want to schedule. Press the CMD key.
4. The keypad displays SUNMONTUEWED. Press the CMD key to display THU FRI SAT.
5. Select the day you want to program.
6. a. If a time has not been set for the day selected, the keypad then displays ACTIVATE TIME. This is followed
by the display MON–:AMPM.
Enter the activate time and select AM or PM.
Enter all schedule times using a 12 hour clock. For example, to enter 6 AM you would enter a
0+6+0+0 and select AM. For 11 PM you would enter a 1+1+0+0 and select PM.
b. If a time has been set for the day selected, the keypad displays Act Time with the time programmed.
Press a Select Key or Area to display the DELETE and KEEP options. Select DELETE to enter a new time.
Select KEEP to keep the current time setting.
7. The keypad returns to the day of the week display allowing you to enter another Favorite schedule. To exit
the user menu or to go back to the SCHEDULES? display, press the Back Arrow key.
Add a Sunrise/Sunset Favorite Schedule
1. At SCHEDULES?, press any Select Key or Area.
2. At PRM EXT OUT FAV, select FAV.
3. Enter the favorite number and press CMD. The screen displays SUNMONTUEWED. Press the CMD key to
display THU FRI SAT.
4. Press the day that you want to set up a schedule on.
5. At ACTIVATEAT, press the second Select Key or Area.
6. Select SUNRISE or SUNSET and then use the Select Keys or Areas below the - and + to set an oset time.
Choose from 5, 10, 15, 30, 45, or 60 minutes before or after sunrise or sunset.
7. Press CMD to save the schedule.
To Next Page
Loading...
Need help?
General
