Dobot M1 Pro - 1.3 General and Personal Safety

Dobot M1 Pro Hardware User Guide
Issue V1.3 (2023-02-02) User Guide Copyright © Yuejiang Technology Co., Ltd
2
• Use before performing a risk assessment.
• Use over-stated specifications.
Safety warning signs
The following safety warning signs may appear in this document, and their meanings are
described as follows. The same safety warning signs are also used in the products.
Sign
Description
DANGER
Indicates a high degree of potential danger, which, if not avoided, will result in death
or serious injury.
ELECTRICITY
May cause dangerous power consumption soon, which, if not avoided, will cause
personal injury or serious damage to the equipment.
HOT
May cause dangerous hot surfaces, which, if touched, may cause personal injury.
WARNING
Indicates a moderate or low potential hazard, which, if not avoided, may cause
minor personal injury and damage to the equipment.
ATTENTION
Indicates a potential risk, which, if ignored, may result in damage to the robot arm,
loss of data or unpredictable results
NOTICE
A situation that, if not avoided, can cause personal injury or damage to the
equipment.
For items marked with such signs, depending on the specific situation, there is
sometimes a possibility of significant consequences
General safety
Follow the safety instructions below when starting and using the robot for the first time.
DANGER
 The robot system is electrical equipment. Non-professional technicians should not
modify the circuit, otherwise, it may cause damage to devices or personal injury.
 Comply with the local laws and regulations when operating the robot. The security
precautions in this document are only supplemental to the local laws and
regulations.
 Use the robot in the specified environment scope. Exceeding the specifications or
load conditions will shorten the service life of the robot, even damage it.
 Ensure that the robot is operated under the security conditions and there is no