DOM Roq - Page 64

DOM Roq® Charge Battery Pack
64
DOM Roq® Smart Lock
2. Remove the battery pack from the motor unit.
DOM Roq® Fig. 61: Removing the Battery Pack
3. To do this, pull the latch of the battery pack slightly in the direction of the arrow (see
Fig. 61). (A)
Attention!
After unlocking, you must hold the battery pack and remove it downwards. Do
not drop the battery pack, otherwise it may be irreparably damaged.
4. Remove the battery pack by pulling it downwards. (B)
5. The battery pack has a USB-C connection (2) for the charging cable. The battery
pack can be charged with a USB charger power supply plug 2.1A / 5V.
The power supply plug is not included in the scope of delivery.
Note!
When the battery pack is removed, the motor cylinder can only be operated with
the handwheel or the key.