DOM Roq - Installation and Preparation; Scope of Delivery

DOMRoq® Scope of Delivery
7
DOM Roq® Smart Lock
Scope of Delivery
With every DOM Roq® order you receive the following components:
1. DOM Roq® motor unit consisting of:
 Motor unit
 Battery pack
 USB-C cable for charging the battery pack (power supply 5V 3.0A)
 Base plate
 Depending on the customer's choice (depending on the customer's door and fitting
dimensions): 2 screws each M5 x length A, B and C and M6 x length A, B and C
[(Direct fastening of the base plate with external fitting. Length range depending on
the determined door leaf thickness and preservation of the inside shield, or if neces-
sary its omission (With the special countersunk washers respectively for M5 and M6
countersunk screws)].
According to your specifications, a total of 6 pairs of different screw lengths are sup-
plied.
 2 screws each M5 x length A and M6 x length A
(according to your specifications)
 2 screws each M5 x length B and M6 x length B (B = A + 5 mm)
 2 screws each M5 x length C and M6 x length C (C = A - 5 mm)
 2 screws each M4 x12 mm and M4 x16 mm
(Direct attachment of the base plate to the cylinder)
 Reflector with adhesive surface (for sticking on glass or mirror surfaces so that the la-
ser can detect the door status)
 Cardboard template for testing the point of impact of the laser
2. Connection adapter / gateway for internet access of the motor unit
3. DOM Roq® lock cylinder (outside key, inside cardan shafts - connection for DOM
Roq® motor unit)
4. 3 mechanical keys
5. Forend screw (fixing screw for the cylinder in the lock)
6. Quick start guides in 4 languages
7. Security card (locking cylinder)
Note!
You must keep the security card in a safe place to which only authorised per-
sons have access.