DOM Roq - Page 8

DOM Roq® Scope of Delivery
8
DOM Roq® Smart Lock
Optional:
8. Adapter - Kit according to your specifications during the door check-up and when order-
ing, consisting of:
 Double-sided adhesive foam part (size L x W x H / 131 x 40 x 15 mm)
 (Holes pre-punched for mounting stabilization of a shield/rosette).
 Spacer sleeves (in various thicknesses 6/7/8/9/10/11 mm, according to your specifi-
cations)
 2 sheet metal/wood screws ST 3.9 x length D
9. Pin Code Reader
 3 AAA cells
 Allen key
 3 fastening screws
 3 dowels
 3 DOM Standard transponder black
Attention!
For additional screwing into the door leaf below the fitting.
This attachment is optional and is used for stabilisation.
Before proceeding, check the ownership of the door and ask the owner for per-
mission if necessary. After dismantling, the door has two holes that cannot be
covered by later application of fittings.
Note!
The adapter kit is not required for mounting directly on the door leaf.