Operation Section
-70-
Getting started
Turning the unit on/off
1. Turn your car's ignition key to ACC or IGN (ON)
position.
Displays the current time.
2. Press the POWER button to turn the power on.
If the source is ready, playback also starts.
To turn on the power directly
By connecting an USB into the USB port or
pressing the AM/FM or USB button (while the
USB device is connected), you can also turn on
the power and the unit then plays.
3. When power is on, press and hold the POWER
button to turn power off.
Adjusting volume directly
1. Turn the VOLUME dial to control volume.
Available volume range: 1 - 41.
Setting the sound
1. Press MENU button repeatedly to select the Sound
setting mode as below;
• BAS (Bass): sets the bass sound level. (-5 ~ +5)
• MID (Middle): sets the middle sound level. (-5 ~
+5)
• TRE (Treble): sets the treble sound level. (-5 ~
+5)
• FAD (Fader: Option): sets the sound fade
between the front and rear speakers. (F15 ~
R15)
• BAL (Balance): sets the sound balance
between the right and left speakers. (L 15 ~ R15)
• LOUD (Loudness): turn Loudness mode on/off
• EQ (Equalizer style): selects the one of the 7
EQ styles (EQ OFF, POP, ROCK, COUNTRY,
VOICE, JAZZ, CLASSIC)
• BEEP (Beep): turn Beep sound on/off
• SCROLL (Scroll): turn Scroll mode on/off
• VOL (Volume): sets the sound volume level.
(VOL 0 ~ VOL 41)
2. Turn the VOLUME dial left/right to adjust the value
of the level, balance or style.
MENU
To Next Page
Loading...
