DORC EVA - User or Operator Instructions for Cleaning the EVA; Recommended Tools and Test Equipment; Recommended Spare Parts; Returning, Packaging and Transport

Service Manual
Ophthalmic Surgical System
Chapter 2 - Maintenance instructions
N° doc.: 30204400-B - Version date: Nov. 01, 2013 - 13
2.3 User or operator instructions for cleaning the EVA
Before cleaning the EVA disconnect the power cord and let the EVA cool down first. The EVA
should only be cleaned with a humid (clean or sterile water) towel.
Be aware of liquid running into the EVA.
2.4 Recommended tools and test equipment
2.5 Recommended spare parts
D.O.R.C. International recommends that you keep the following parts on hand. If a problem
develops, this will allow you to return the unit to service quickly.
2.6 Returning, Packaging and Transport
Before returning the equipment to D.O.R.C. International for service, please contact our Ser-
vice Department; for address see par. 1.2, page 8.
To return the equipment to the D.O.R.C. International Service Department, a written descrip-
tion including the following information must accompany all returned units:
1. The customer name, address and telephone number;
2. The customer account number;
3. A description of the problem or service desired;
4. The return authorization number.
Returned products should be shipped including foot pedal and any handpiece which may be
associated with the fault.
Item Specification
1. Auto-Ranging Multimeter
2. Scopemeter
3. Pressure meter
4. Miniature Inspection Light
5. Inspection mirror
6. Set of Flat-tip Screwdrivers
7. RF Voltmeter DTS600
8. Set of socket-head screw wrench
Part Description Dimension Number
Fuse Voltage: 100 240 V
T6.3AL/250V slow-blow or
T6.3AH/250V slow-blow
5 x 20 mm 2