Dover HEIL Half/Pack Factor AFL - Page 135

Half/Pack
®
Issued April 2018
Body Controller Software
Copyright 2018, Heil Environmental
Printed in the U.S.A.
Body Controller Software
129
Condition
Modifiable Parameters
Default Setting
A
None
N/A
Function Logic:
Input Device
Status
I/O Address
Status
Tailgate Lower Input
Activated
CAN
ON (CAN Control)
I10 Input Function – Tailgate Lock Switch (CAN - In Cab Input)
This CAN control is used to lock the Tailgate, either from Street side or from the Curb side of a
dual control panel unit.
Condition
Modifiable Parameters
Default Setting
A
None
N/A
Function Logic:
Input Device
Status
I/O Address
Status
Tailgate Lock Input
Activated
CAN
ON (CAN Control)
I11 Input Function – Tailgate Unlock Switch (CAN - In Cab Input)
This CAN control is used to unlock the Tailgate, either from Street side or from the Curb side of a
dual control panel unit.
Condition
Modifiable Parameters
Default Setting
A
None
N/A
Function Logic:
Input Device
Status
I/O Address
Status
Tailgate Unlock Input
Activated
CAN
ON (CAN Control)
I12 Input Function – Auto Lift Enable Switch (CAN - In Cab Input)
This CAN control is used to turn ON/OFF the Auto Lift Enable Circuit, either from Street side or from the
Curb side of a dual control panel unit.
Condition
Modifiable Parameters
Default Setting
A
None
N/A
Function Logic:
Input Device
Status
I/O Address
Status
Auto Lift Up Enable Circuit
Activated
CAN
ON (CAN Control)