Half/Pack
®
Issued April 2018
Body Controller Software
Copyright 2018, Heil Environmental
Printed in the U.S.A.
Body Controller Software
165
Indication: A. Packer Sensor faulty
B. Sensor failure ON
Disabled Functions: Packer functions and Fork function.
Fault Reset: Check for the Faulty sensor or Sensor mounting position or calibrate the faulty sensor and
also check Packer Cylinder for proper operation.
Fork Sensor Fault (standard equipment)
The Fork position value is less than ‘-100’ or greater than ‘1400’ during the operation then the diagnostic message will
be displayed in the Insight display. Also the value is not within the High or Low limit.
Insight Display Illustration:
Indication: A. Fork Sensor faulty
B. Sensor failure ON
Disabled Functions: Forks will not raise above windshield.
Fault Reset: Check for the Faulty sensor or Sensor mounting position or calibrate the faulty sensor and
check Cab protector prox. switches for proper operation.
To Next Page
Loading...