Field Description
Detect Button
For model LX Plus only. This will start an auto-detect for 924B probes, DMP 1-
wire probes and Smart Sensors with the iSIM module.
Devices found during auto-detection will show in the drop-down list.
Total OM4
Relays
For model LX Plus only. If OM4 module(s) are connected to the console, select
the total number of relays. Each OM4 module has four (4) relays.
Example: If only one OM4 is connected, select 4. If two OM4 modules are con-
nected, select 8.
*Fields marked with an asterisk are mandatory.
Click Save. A confirmation message will come into view.
Select CLOSE.
6.1.2 System
NOTE: All fields have selections (but not Alarm settings/Tolerance & Leak threshold) with
default values. Changes to level and/or volume unit and number of decimals can automatically
change with the selection.
M2051_r4 MagLink LX 4 and LX Plus Configuration Manual | Dover Fueling Solutions 22
To Next Page
Loading...
