Dover ProGauge MagLink LX Plus - Sensor Alarms; Line Alarms

11.3 Sensor Alarms
1. Select a Sensor from the drop-down. Alternatively, use the slider button to select All sensors.
2. Use the date-selector to select a From Date and To Date for your report.
3. Click the Load button to show the data.
11.4 Line Alarms
This report shows all alarms related to line leak. It will also show the results of leak tests with the test type,
the running pressure in psi, the reference pressure of the test in psi and the leak rate (in gph on lts/hr).
1. Select a Line from the drop-down. Alternatively, use the slider button to select All Lines.
2. Use the date-selector to select a From Date and To Date for your report.
3. Click the Load button to show the data.
M2051_r4 MagLink LX 4 and LX Plus Configuration Manual | Dover Fueling Solutions 64