l Pump transactions (if connected to a POS/FCC that uses the Gilbarco BCD protocol).
Field Description
Server The IP address of the server that will receive the files (given by the server administrator).
Folder
The folder in the server where the files are to be sent, provided by the server administrator (optional, can be
left blank)
User User name provided by the server administrator
Password Password provided by the server administrator
ID Console identifier. If set to 0, the FTP transfer gets disabled.
Port FTP port, provided by the server administrator
Interval How often the console will attempt to establish connection to the server in order to send the files
Transfer
mode
Active or Passive, info provided by the server administrator.
Enable SFTP For SFTP connections
Click Save when you complete the Fairbanks tab configuration.
6.1.7 SMTP
The console can send email notifications related to tank information, tank events and console events.
Configure the SMTP connection parameters in this page. Notifications and email recipients are configured
under "Notifications Menu" on page31.
Field Description
Server The email server that handles the email functionality
Sender Email of the sender
User Username provided by the mail Server
Password Password provided by the mail Server
Port SMTP port, provided by the mail Server
Enable SSL Activate it for SSL connections.
Use the TEST button to send a test email to a specified recipient.
M2051_r4 MagLink LX 4 and LX Plus Configuration Manual | Dover Fueling Solutions 28
To Next Page
Loading...
