11.7 Line Leak Tests
1. Select an LLD number from the drop-down.
2. Use the date-selector to select a From Date and To Date for your report.
3. Click the Load button to show the data.
4. The LLD leak test report can be exported to a csv format that can be saved in a spreadsheet or text
editor. Click the CSV Export button to continue.
This report will show the results of line leak tests that have been completed. The report will show:
l The start and end time of the test
l The Leak threshold (type)
l The leak rate calculated in liters/hr
l The reference pressure for the leak threshold
l The Running pressure (the running pressure is the pressure in the pipeline which is recorded once the
STP has stopped to pressurize).
l The LLD leak test result.
M2051_r4 MagLink LX 4 and LX Plus Configuration Manual | Dover Fueling Solutions 67
To Next Page
Loading...
