NOTE: The STATUS field is for future use and can be ignored at this time.
NOTE: Position 2 is only be shown in the LX4 andis not shown in the LX Plus (LX Plus does
not support internal inputs).
Click Save when you complete the System tab configuration.
The system will also show the status of the Dip-switches 1 & 2.
6.1.3 Protocols
This section specifies the protocol to use to communicate with a POS (point of sale) system or a FCC
(forecourt controller system).
Field Description
Connection
Select the type of connection:
None: If no device communicates with the console.
Serial: If a serial RS232 connection is made between the POS/FCC and the console.
TCP/IP: If a TCP-IP connection is made between the POS/FCC and the console.
Sales
Click YES if the POS/FCC will transmit the dispenser sales transactions to the console. The Gilbarco
BCD protocol is supported for this function. Note, that only one connection at a time can support the
sales transactions.
M2051_r4 MagLink LX 4 and LX Plus Configuration Manual | Dover Fueling Solutions 24
To Next Page
Loading...
