6.3.5 Relays
The screenshot above shows the menu for an LX Plus that has eight (8) external relays and four (4) OM4
relays configured at the System Settings/Site Info menu.
NOTE: The same menu in a LX4 console would show only the four (4) Internal Relays as it
does not support the external OM4.
The relays of the console can be configured in this screen.
NOTE: The External Relays and OM4 relays (LX Plus models only) that show must first be set
up in "Site Info" on page21.
The available alarms/actions that can be linked to a relay:
Disabled Low High/High Water
No Link Low/Low Ethanol High
Probe Error Leak No Leak Test Sudden Loss
High/High Water
Click Save when you complete the Relays configuration.
M2051_r4 MagLink LX 4 and LX Plus Configuration Manual | Dover Fueling Solutions 42
To Next Page
Loading...
