Section 9 Sensor Status
The Sensor Status screen is shown in the image above. The icons in the example refer to a ProGauge
Discriminating Sensor with two floats.
1. Icon 1 shows the status of the Product float.
2. Icon 2 shows the status of the Water float.
3. The full sensor status is shown at the top of the panel.
4. Push the ACK IS REQUIRED button to acknowledge the alarm. This will also stop the alarm buzzer.
M2051_r4 MagLink LX 4 and LX Plus Configuration Manual | Dover Fueling Solutions 60
To Next Page
Loading...
