Field Alarm Description
Sensor
Compliance
A report with sensor history that can be started to be emailed from the GUI. Select the email recipients here.
Shift Shift report
Sudden loss Sudden loss report. NOTE: This requires the site to be closed.
Sensor Sensor alarm
Click Save when you complete the Notifications tab configuration.
6.3 Tank Setup Menu
1. Select Tank setup from the Main Menu. The number of Tanks configured in "Site Info" on page21
will show in the Tabs bar.
2. Select a Tank to configure.
3. An information bar below the tabs bar will show the Height and Max Volume of the selected tank.
This is read-only data from the last line of the tank strapping table ("Straptable" on page43).
6.3.1 Settings
NOTE: If the tank does not do autocalibration / reconciliation, then select the Standard mode
button and configure as below.
4. The bar below the information bar shows the configuration parameter selections. Settings is the
first selection.
a. Move the Enabled slider button to ON to let the application query the installed probe
during the read cycle. A probe query does not occur if this button is OFF.
b. Description: Enter a description of the tank.
c. Select the product type from the Product family drop-down.
M2051_r4 MagLink LX 4 and LX Plus Configuration Manual | Dover Fueling Solutions 33
To Next Page
Loading...
