86 Dover Fueling Solutions W2940305 Rev 07 8/2019
Function Number & Name Sub-function Number & Description
Configuration
Setting
Std.
Model
w/ Pulse
Output
.02 Max. # of display errors/filling, 0-99, 0 =
disabled
10
.03 Stop for “no flow” time limit, 0-1000 seconds 90
.04 Max. # of consecutive no flow events w/o
error, 0-10, 0 = disabled
3
.05 Max. # of flow lost events w/o error, 0-10, 0 =
disabled
3
.06 Max. # of unfinished fillings, 0-10, 0 =
disabled
0
.07 Max. $ filling amount/filling, 1-6 digits 9999.00
.08 Max. volume amount/filling, 1-6 digits 999.000
.09 Stop for “flow lost” time limit ,0-1000 seconds 300
F18 Blend Ratio
Configuration
SN Blend ratio (data range 0-101) in % of hi
feedstock, 101 = disabled for a non-blend
.11=101
.21=101
F19 Volume Unit Specific
Configuration
.10 Suppressed volume @ start of filling, 1-9 cl. 3
.11 Max. volume for selection of new product, 1-
9 cl.
.12 Suppress overflow of preset limit, 0-99 cl. 5
.13 Preset/prepay slow down volume delta, 5-
399 cl.
57
.14 Forward pulse limit on idle/unused WIP, 1-99
cl.
95
.15 Liters pulse output resolution
0=Disabled
1=1 pulse per unit
2=10 pulses per unit
3=100 pulses per unit
4=250 pulses per unit
0
.16 Calibration Test Container Volume –Liters
(UHC only)
20 – 1000 Liters
20
.20 Suppressed volume @ start of filling, 1-99
(units of .001 gals.)
9
.21 Max. volume for selection of new product, 1-
99 (units of .001 gals.)
.22 Suppress overflow of preset limit, 0-99 (units
of .001 gals.)
4
.23 Preset/prepay slow down volume delta, 2-
999 (units of .001 gals.)
150
.24 Forward pulse limit on idle/unused pulser, 1-
999 (units of .001 gals.)
250
.25 Gallons pulse output resolution
0=Disabled
1=1 pulse per unit
2=10 pulses per unit
3=100 pulses per unit
4=250 pulses per unit
5=500 pulses per unit
6=1000 pulses per unit
0 3
.26 Calibration Test Container Volume – Gallons
(UHC only)
5 – 250 Gallons
5
To Next Page
Loading...
Need help?
General
