Dräger Polaris 600

Instructions for use Polaris 600 79
Maintenance
Display mount and arm
system
Every 2 years
Check the locking seg-
ments on the swivel arm,
see "Checking the locking
devices on the C swivel
arm and the S swivel arm"
on page 86.
Specialized service per-
sonnel
Check the locking seg-
ments on the spring arm,
see "Checking the locking
devices on the spring arm"
on page 87.
Check the circlip on the
lower swivel arm to the
spindle joint, see "Check-
ing the circlip on the lower
swivel arm to the spindle
joint" on page 87.
Grease the brake screws,
see "Greasing the brake
screws" on page 87.
– Grease the brake
screws on the swivel
arm and the spring
arm.
– Grease the brake
screw on the spring
arm/display mount
connection.
Check the load balancing
and spring force on the
spring arm and readjust if
necessary.
Check the arm system
(central axis, swivel arm,
and spring arm) for colli-
sion damage (welding
seams free of cracks).
Check for deformations of
the arm system and
whether parts have
become loose.
Component Interval Task Personnel responsible