Dräger Testor 3100 User Manual

33
Order list
Name and Description Order No.
Dräger Testor 2100 R 53 400
Upgrade kit Testor 2100
including three sensors
AG 02 650
Dräger Testor 3100 AG 02 660
Screw clamp R 50 809
Medium pressure hose NW 7
for connecting the Testor 2100 to a station-
ary compressed air network. One end with
Dräger PA plug-in coupling, the other end
open.
R 46 542
Medium pressure shut-off valve AG 02 382
Adaptor II software AG 02 250
USB cable AG 02 661
Accessories for testing masks:
Mask holder S
holder for Supra masks
R 53 930
Mask holder HC
holder with Schuberth connection
AG 02 408
Adaptor (RA) R 53 344
Adaptor (P/PE/RP) R 53 345
Exhalation valve sealing plug RA/ESA R 53 349
Exhalation valve sealing plug P/PE R 53 346
Exhalation valve sealing plug FPS 7000 R 53 346
Accessories for testing lung demand valves:
Plug 9/20 12 94 091
Test piece PE
Round thread on unified screw thread
R 51 591
Test piece P
Round thread on plug in connector
R 50 028
ESA adaptor
Unified screw thread on ESA connection,
test piece PE is also needed.
AG 02 406
Accessories for testing compressed air breathing
apparatus:
Adaptor for the lung demand valve of the
PSS 90/100
33 37 650
Adaptor for the lung demand valve of the
PSS 7000
On request
External high pressure manometer R 28 445
T-piece 33 37 660
Accessories for testing protection suits:
Compressed air pistol R 51 034
Hose clip R 50 866
Filling hose
Specify a length of 3 m when ordering
11 98 343
Adaptor (RA) R 53 344
1)
1) The adaptor must have a hole throughout its entire length.
Drill hole with a 5 mm bit if necessary.
Test cap (2x necessary) R 53 289
Valve test plug R 53 287

Dräger Testor 3100 Specifications

General

Brand	Dräger
Model	Testor 3100
Category	Test Equipment
Language	English