Vigor2120 Series User’s Guide
126
on always.
Ping IP/Hostname – If you choose Ping Detect as
detection mode, you have to type IP address in this field
for pinging.
TTL (Time to Live) –If you choose Ping Detect as
detection mode, you have to type TTL value.
RIPng Protocol
RIPng (RIP next generation) offers the same functions and
benefits as IPv4 RIP v2.
Bridge Mode
Enable Bridge Mode - If the function is enabled, the router
will work as a bridge modem.
Bridge Subnet – Make a bridge between the selected LAN
subnet and such WAN interface.
After finished the above settings, click OK to save the settings.
To Next Page
Loading...
