VigorSwitch G2080 User’s Guide
3
z Jumbo frame support
z Programmable classifier for QoS (Layer 4/Multimedia)
z 8K MAC address and 4K VLAN support (IEEE802.1Q)
z Per-port shaping, policing, and Broadcast Storm Control
z IEEE802.1Q-in-Q nested VLAN support
z Full-duplex flow control (IEEE802.3x) and half-duplex backpressure
z Extensive front-panel diagnostic LEDs; System: Power, TP Port1-8: LINK/ACT,
10/100/1000Mbps, SFP Port 7, 8: SFP(LINK/ACT)
M
M
a
a
n
n
a
a
g
g
e
e
m
m
e
e
n
n
t
t
z Supports concisely the status of port and easily port configuration
z Supports per port traffic monitoring counters
z Supports a snapshot of the system Information when you login
z Supports port mirror function
z Supports the static trunk function
z Supports 802.1Q VLAN
z Supports user management and limits three users to login
z Maximal packet length can be up to 9208 bytes for jumbo frame application
z Supports DHCP Broadcasting Suppression to avoid network suspended or crashed
z Supports to send the trap event while monitored events happened
z Supports default configuration which can be restored to overwrite the current
configuration which is working on via web browser and CLI
z Supports on-line plug/unplug SFP modules
z Supports Quality of Service (QoS) for real time applications based on the
information taken from Layer 2 to Layer 4, such as VoIP
z Built-in web-based management and CLI management, providing a more
convenient UI for the user
z Supports port mirror function with ingress traffic
z Supports rapid spanning tree (802.1w RSTP)
z Supports 802.1X port security on a VLAN
z Supports user management and only first login administrator can configure the device.
The rest of users can only view the switch
z SNMP access can be disabled and prevent from illegal SNMP access
z Supports Ingress, Non-unicast and Egress Bandwidth rating management with a
resolution of 1Mbps
z The trap event and alarm message can be transferred via e-mail and mobile phone
short message
z Supports diagnostics to let administrator knowing the hardware status
z Supports external loopback test to check if the link is ok
z TFTP for firmware upgrade, system log upload and config file import/export
To Next Page
Loading...
Need help?
General