VigorSwitch G2080 User’s Guide
85
Passive - A Passive LACP port will not actively send
LACPDU out before it receives an LACPDU from its link
partner.
Aggtr: Aggtr is an abbreviation of “aggregator”. Every port is also
an aggregator, and its own aggregator ID is the same as its
own Port No. We can regard an aggregator as a
representative of a trunking group. Ports with same Group
ID and using same trunking method will have the
opportunity to aggregate to a particular aggregator port. This
aggregator port is usually the port with the smallest Port No.
within the trunking group.
Status: This field represents the trunking status of a port which uses
a trunking method other than “None”. It also represents the
management link status of a port which uses the “None”
trunking method. “---“ means “not ready”
To Next Page
Loading...
Need help?
General