Protections
88
7.1.2 HARDWARE REQUIREMENTS
• DSE8610 V5.0 controller or higher.
• DC controlled generator breaker.
• Auxiliary contact to feed back generator breaker status to the DSE controller.
• External relay driven by the DSE module to control the excitation of the alternator.
Status
Excitation Ramp
L-N V A
L-L V
kW
Hz
Pf
Status
On Load
Excitation output closed voltage rises to
nominal settings.
Once the voltage and frequency are
within configurable limits the set(s) can
take load.
To Next Page
Loading...
