The display shows New PIN on the and the first
of the 4 digits active for the entry (Fig 141).
Entering the code:
●
The 2 arrows above and below the digit indicate
that the number can be changed from 0 to 9
using (1) and (2).
●
Press ENTER (3) to confirm the digit and move
on to the following one.
●
Repeat the procedure until entering all 4 digits
(Fig 142).
Once the last digit has been confirmed Save (Fig 143)
is displayed.
Press ENTER (3) to confirm, Saved is then displayed
for a few seconds and the instrument panel returns
to the previous screen.
165
To Next Page
Loading...
