Ducati MULTISTRADA V4 - Page 172

Set time
This function allows  the time, in the example
shown here the time format is 12 hours (AM/PM).
●
Use  (1) and (2) from the Interactive
Menu to select the  menu item and press
ENTER (3).
●
Select the Date and time item and press ENTER
(3).
●
Select the Set time item and press ENTER (3).
The hour number becomes selectable and is
displayed with two arrows placed above and below it;
the available values are also displayed (Fig 157). Use
 (1) and (2) to scroll and select the desired
value. Press ENTER (3) to confirm and move on to
the number of the minutes.
Fig 156
Fig 157
171