The minute number becomes selectable and is
displayed with two arrows placed above and below it;
the available values are also displayed (Fig 158). Use
(1) and (2) to scroll and select the desired
value. Press ENTER (3) to confirm and move on to
the AM/PM selection.
The AM or PM item becomes selectable and is
displayed with two arrows above and below it
(Fig 159). Use (1) and (2) to select the desired
value. Press ENTER (3) to confirm and return to the
previous screen.
Note
If the currently set time format is 24 hours, the
AM/PM parameter is not shown.
Fig 158
Fig 159
172
To Next Page
Loading...
