2017-0132 / 42
-4-
4.3.d - COMANDI 3
a
SPAZZOLA (OPT)
1) Interruttore sbraccio
- Posizionato su la spazzola sbraccia a destra.
- Posizionato su
la spazzola sbraccia a sinistra.
2) Interruttore rotazione
- Posizionato su mette in rotazione la spazzola in
senso antiorario ed abilita tutti i comandi relativi alla 3
a
spazzola.
- Posizionato su mette in rotazione la spazzola in sen-
so orario ed abilita tutti i comandi relativi alla 3
a
spazzola.
- Posizionato al centro arresta la rotazione e disabilita tutti
i comandi relativi alla 3
a
spazzola.
3) Interruttore mandata acqua
- Posizionato su invia acqua alla 3
a
spazzola quando
é sbracciata a sinistra.
- Posizionato su invia acqua alla 3
a
spazzola quando
é sbracciata a destra.
- Posizionato al centro arresta la mandata dell’acqua alla
3
a
spazzola.
4) Joystick inclinazione
- Posizionato su inclina la spazzola a destra.
- Posizionato su inclina la spazzola a sinistra.
- Posizionato su inclina la spazzola in avanti.
- Posizionato su inclina la spazzola indietro.
- Rilasciato, torna in posizione centrale fermando la
spazzola nella posizione raggiunta.
A
1
2
3
4
5
4.3.d - 3rd BRUSH CONTROLS (OPT)
1) Swinging switch
- If positioned on
the brush ranges to the right.
- If positioned on
the brush ranges to the left.
2) Rotation switch
- If positioned on it makes the brush turn counter-
clockwise and enables all the 3rd brush controls.
- If positioned on it makes the brush turn clockwise
and enables all the 3rd brush controls.
- If positioned in the centre, it stops the rotation and dis-
ables all the 3rd brush controls.
3) Water supply switch
- If positioned on , it supplies the third brush with water
when the brush is swung to the left.
- If positioned on , it supplies the third brush with water
when the brush is swung to the right.
- If positioned in the middle, it stops the supply of water to
the third brush.
4) Inclination joystick
- If positioned on it tilts the brush to the right.
- If positioned on it tilts the brush to the left.
- If positioned on it tilts the brush forward.
- If positioned on it tilts the brush backward.
- If it is released, it goes back to the central position and
stops the brush in the position it has reached.