Control desks are available in ‘wardrobe’ type style (figure 3) or ‘desk’ type style (figure 4). These
can vary in complexity and are able to house a whole host of burner/boiler controllers, water levels
controls, inverters, plc etc...
Air Inlet Silencer
Because of their design characteristics, 'T' series burners operate at very low noise levels, however,
further reduction of these levels can be made by fitting air inlet silencers which are designed to
cover the air shutter castings. The standard foam lined silencer typically offers sound levels in the
region of 80dBA. An optional ‘Snorkel’ type silencer is available which will reduce sound levels to
below 75dBA. Silencers can also be tailored to suit ducted air supplies, filters or additional acoustic
attenuation. For extremely sensitive installations, 'Acoustic Shrouds' which cover the entire burner
can be individually designed to suit most applications. Quotations are available on request.
Typical Acoustic Shroud Burner fitted with 'Snorkel' Silencer
To Next Page
Loading...