DuraLabel.com | 800.788.5572
Contents | 3
CONTENTS
8. Configuring Ethernet Card
37
8.1 Setting an Ethernet Port using the Diagnostic Tool
37
8.2 Installing a Driver for the Ethernet Port
37
8.3 Manually Configuring the IP Address
40
8.4 Setting a Static IP
40
9. Cleaning and General Maintenance
41
9.1 Print Head
41
9.2 Cutter
42
9.3 Platen Roller
43
10. Troubleshooting
44
10.1 Speckles Appear Throughout Label
44
10.2 Fading of Text/Graphics Occurs During Printing
44
10.3 Hash Marks Appear Throughout Printing
44
10.4 Solid Printed Line Appears Across Entire Label
44
10.5 Unprinted Horizontal Lines Appear
45
10.6 LED Flashes Between Green “ON-LINE” and Red “ERROR”
45
10.7 Printer is Printing Labels but not Cutting Them
45
10.8 Receive a “No Ribbon” Error Message
46
10.9 Receive a “No Paper” or “Paper Jam” Error Message
46
10.10 Printer Cuts Labels Off-Center or into the Next Label
47
10.11 Wrinkles Appear on Half of Label
47
11. Specifications
50
11.1 Printer
50
11.2 Indicators and Buttons
50
11.3 Communication Interface
50
11.4 Power Requirements
50
11.5 Environment
50
11.6 Label Supply
50
11.7 Ribbon Supply
51
11.8 Printer Body
51
To Next Page
Loading...
