6 E4D NEVO Version 5.0 10822801.C
NEVO System
The E4D NEVO system includes a plug-and-play wand and either a laptop or upgraded hardware to the cart.
What’s New With NEVO?
• Plug-and-play technology - You can now have multiple design stations and move the scanner from one
station to another without shutting down the computer. The wand can be moved to the next station and
be scanning Patient B while you continue designing Patient A.
• The stando and disposable sleeves have been replaced with solid removable tips. The system
comes with three tips which means no down time between patients. Tips require e ective high-level
disinfection.
• The mirror in the tip is heated to prevent intraoral fogging.
• Convenient ON/OFF button on the wand to start and stop the scanning process.
• Scanning is faster and easier with video-like capture of data. You can watch your model build and move
accordingly. Capture full arches and buccal bite cases faster and easier than before.
• New Time Saver functionality - You can copy your Pre-op model to create your prep model or you can
copy your prep model to create your bite registration model. After the model is copied, you can erase the
pre-op or prep and re-scan that area.
• Full ICE View - The scans are turned into clinically realistic images of the entire model and can even be
used in your buccal bite evaluation.
• New Erase Tool enables you to remove part of the scans. Did you spot a tissue tag or retraction cord
covering the margin that needs to be removed? You can x the problem, erase that spot on the model,
and re-scan that area. No need to start over.
• Improved automatic alignment of models
• New bridge capability
To Next Page
Loading...