Easy xLogic User Manual

88
88
88
88
Place two yearly timer switch SFBs on your programming interface and configure the blocks as
specified.
Create a logical link of the blocks via a standard OR block. The OR output is 1 if at least one of
the yearly timer switches is set.
Note ： The Yearly and Pulse settings are available only for the ELC-12 &Upgraded ELC-18 series and the
standard/economic ELC-18 with the hardware version number must be not less than "2.04".

Easy xLogic Specifications

General

Brand	Easy
Model	xLogic
Category	Control Unit
Language	English