2. Make a visual inspection to
make sure that there are no
signs of shipping damages.
Examine the indicators. See the
instructions next to the
indicators on the package.
3. Open the UPS package and
remove the ramp attached to
the side of the package by
forcing the locking pieces to
open. There are locking pieces
in the corners of the package
and similar locking pieces hold
the ramp in place.
4. Place the ramp on the floor and
attach it to the pallet with nails
or screws so that it can be
safely used for wheeling the
UPS off the pallet.
Eaton 93PM UPS 30–200 kVA User's and installation guide
©
Eaton Corporation plc 2017. All rights reserved. Revision: 005 Document ID: P-164000249 47 (126)
To Next Page
Loading...
