5. If the leveling feet are not fully
retracted, turn them until they
are retracted.
6. Open the cabinet door.
7. Remove the bolts that fasten
the shipping brackets to the
cabinet and to the pallet.
8. Remove the shipping brackets.
Note: After you have removed the shipping brackets, move the unit
immediately away from the pallet.
After you have removed the shipping brackets and retracted the leveling feet,
do not use a forklift to move the unit while it is still on the pallet. Note that the
UPS cabinet is heavy and there are casters under the cabinet.
Eaton 93PM UPS 30–200 kVA User's and installation guide
©
Eaton Corporation plc 2017. All rights reserved. Revision: 005 Document ID: P-164000249 48 (126)
To Next Page
Loading...
