Eaton 93PM - Figure 6-13. Typical Statistics Screen; Sign in

UPS Operating Instructions
Eaton 93PM UPS (20–100 kW, 480V – 100 kW Frame) Installation and Operation Manual P-164000227—Rev 6 www.eaton.com/powerquality 6-11
Figure 6-13. Typical Statistics Screen
6.2.7 Sign In
The Controls and Setting screens are restricted. The user must sign in using a password to gain access.
CAUTION
To prevent inadvertent or unauthorized power disruption to the critical load or auxiliary lighting
system, change the Level 1 and Level 2 default passwords when system commissioning startup is
performed.
To Sign in:
1. Tap the lock button in the upper right corner of the screen. The sign in screen is displayed (see
Figure 6-14).
2. Tap the password entry area on the screen.
3. Enter the password using the keypad displayed and tap the return key (see Figure 6-15).
Level 1 default password is 1111. Se tt in gs Leve l 2 d efa ul t p assword is 0101.
4. Sign in is complete. Tap continue to return to previous screen.