Eaton 93PR Series - 1.1 Audience; CE Marking

25-75 kW
User's and Installation Guide 2
CAUTION
• Installationorservicingshouldbeperformedbyqualifiedservicepersonnelknowledgeableofbatteriesand
requiredprecautions.Keepunauthorizedpersonnelawayfrombatteries.Considerallwarnings,cautions,and
notesbeforeinstallingorreplacingbatteries.DONOTDISCONNECTthebatterieswhiletheUPSisinBattery
Mode.
• ReplacebatterieswiththesamenumberandtypeofbatteriesasoriginallyinstalledintheUPS.
• Disconnectthechargingsourcepriortoconnectingordisconnectingterminals.
• Determineifthebatteryisinadvertentlygrounded.Ifitis,removethesourceoftheground.Contactingany
part of a grounded battery can cause a risk of electric shock. An electric shock is less likely if you disconnect
thegroundingconnectionbeforeyouworkonthebatteries.
• Properdisposalofbatteriesisrequired.Refertolocalcodesfordisposalrequirements.
• Donotdisposeofbatteriesinafire.Batteriesmayexplodewhenexposedtoflame.
• KeeptheUPSdoorclosedandfrontpanelsinstalledtoensurepropercoolingairflowandtoprotect
personnel from dangerous voltages inside the unit.
• DonotinstalloroperatetheUPSsystemclosetogasorelectricheatsources.
• Theoperatingenvironmentshouldbemaintainedwithintheparametersstatedinthismanual.
• Keepsurroundingsuncluttered,clean,andfreefromexcessmoisture.
• ObserveallDANGER,CAUTION,andWARNINGnoticesaffixedtotheinsideandoutsideoftheequipment.
1.1 Audience
The intended audience of this manual are people who plan the installation, install, and use the UPS and UPS
Module. This manual provides guidelines for checking the delivery, installing, and operating of the UPS.
The reader is expected to know the fundamentals of electricity, wiring, electrical components and electrical
schematic symbols. This manual is written for a global reader.
NOTE
ReadthemanualbeforeoperatingorworkingontheUPS.
1.2 CE Marking
The product has the CE marking in compliance with the following European directives:
• LVDirective(Safety)2006/95/EC
• EMCDirective2004/108/EC
Declaration of conformity with UPS harmonised standards and directives EN 62040-1 (Safety) and EN
62040-2 (EMC) are available at http://powerquality.eaton.com or by contacting your nearest Eaton office or
authorized partner.