25-75 kW
User's and Installation Guide
61
6.3 Signing In
If the level 1 password is enabled, you need to sign in.
1. Press the lock button in the upper right corner of the screen.
2. Type your passcode and press
OK
.
3. You are signed in. Press
Continue
to return to the previous screen.
There are three attempts to input the password. If an incorrect password is given more than three times, you
need to wait for 30 minutes before trying again.
To modify the user settings, you need to enter level 2 password.
For the default passwords, see Chapter 11 APPENDIX A: User settings.
To Next Page
Loading...
