Eaton 93PR Series - 6 Ups Operating Instructions

25-75 kW
User's and Installation Guide 55
6 UPS OPERATING INSTRUCTIONS
This section describes how to operate the UPS.
NOTE
• BeforestartingtheUPS,ensureallinstallationtasksarecompleteandapreliminarystartuphasbeen
performed by authorized service personnel.
• Thepreliminarystartupverifiesallelectricalinterconnectionstoensuretheinstallationwassuccessfuland
the system operates properly.
• Read these instructions and have a thorough understanding of UPS operation before attempting to operate
any of the controls.
• TheUPSisconfiguredtooperatewithoneoffollowingnominalvoltages:380,400,or415VAC.
• BeforeoperatingtheUPS,confirmtheUPSnominalvoltageandfrequencyfromdisplaybyselectingSettings
-> Info.
• IftheUPSneedtobeoperatedwithanothervoltageorfrequency,contactyourclosestEatonofficeorEaton
authorized partner.
NOTE
The UPS in not a measuring device. All displayed measurements are only approximate values.