Slowly let up on the pedal and
measure the pedal position at the
moment the gauge can be removed:
• If pedal is more than 1" (25.4 mm)
from the floor, readjust the truck
linkage to move the yoke fingers
further from the release bearing.
Repeat Step 4.
Less than 1"
(25.4 mm)
Have an assistant insert 0.010"
(0.25 mm) feeler gauge between
the release bearing and the
clutch brake.
Press the pedal down to the floor
to clamp the gauge:
• If the gauge does not clamp,
readjust the truck linkage and
move the yoke finger closer to
the bearing.
Use a gauge long enough to keep
hands away f
rom moving parts.
4
5
Release
Bearing
Yoke
Finger
Clutch
Brake
WARNING
To Next Page
Loading...
