32
ECA Clutch
Remove Clutch
Note the position of the wear indicating tab on the clutch. If
the tab is near the “REPLACE” position, the clutch should be
replaced.
1. If the clutch is to be reinstalled and the transmission
is still in vehicle, complete steps 1-7 of the “ECA
Clutch In-Vehicle Resetting Procedure” on page 45
to ensure proper function after reinstallation.
Move ECA Clutch to Service Position
Turn ignition
switch to on.
A
F
FO
NO
TRATS
B
Plug 9-pin connector
into dash port.
3
Click on ServiceRanger icon
to launch program.
C
CAUTION
Ensure that hands are not inside the clutch
housing while opening or closing the clutch.
To Next Page
Loading...
